Switching Screens with New Cost-Effective Manual Screen Changers is Easier, with Operators Exerting Only 50% of the Usual Force


New BKG® NorCon™ EMR and XMR Screen Changers from Nordson Provide Cost Advantages of Manual Units and Are Easily Retrofitted in U.S. or Metric Systems

New-generation manual screen changers from Nordson Corporation reduce by 50% the force required for switching screens on the extrusion line, making easier a task that used to challenge the strength of some machine operators.

Like standard manual screen changers from Nordson, the new BKG® NorCon™ EMR and XMR models provide a less expensive alternative to stationary screen changer systems. The operator replaces a contaminated screen with a clean one by turning a handle or lever that activates an indexing system. The new EMR and XMR screen changers contain a ratchet mechanism that reduces the force required to turn the handle. This mechanism can also be retrofitted onto corresponding standard models, EM and XM, at either the customer’s plant or a Nordson technical support facility. While EMR and EM units are for use with extruders sized in inches, the XMR and XM units are for metric equipment.

As an example of the reduction in screen-switching force, tests by Nordson showed that the NorCon EMR-35 unit requires 25 lb. (111 N), as against 50 lb. (222 N) for the EM-35.

“By means of a simple swing of a handle during routine shutdowns, NorCon manual screen changers quickly bring clean screens on-line, minimizing costly downtime by avoiding need for line disconnection,” said Christian Schroeder, global product manager for melt delivery products. “The force reduction provided by our new EMR and XMR models make screen changes even more efficient while improving the working conditions of machine operators.”

Available standard NorCon manual screen changers range from 10 to 65 inches for EM units and 30 to 120 mm for XM units. EMR and XMR models are available in most of these sizes.


Nordson Corporation engineers, manufactures and markets differentiated products and systems used for the precision dispensing of adhesives, coatings, sealants, biomaterials, polymers,  plastics and other materials, fluid management, test and inspection, UV curing and plasma surface treatment, all supported by application expertise and direct global sales and service.  Nordson serves a wide variety of consumer non-durable, durable and technology end markets including packaging, nonwovens, electronics, medical, appliances, energy, transportation, construction, and general product assembly and finishing.  Founded in 1954 and headquartered in Westlake, Ohio, the company has operations and support offices in more than 30 countries.  Visit Nordson on the web at http://www.nordson.com, @Nordson_Corp, or www.facebook.com/nordson.

Nordson Polymer Processing Systems provides customers with engineered components to melt, homogenize, filter, meter, and give shape to plastic and fluid coating materials. Nordson Corporation leverages the collective plastics industry experience from a series of strategic acquisitions to offer a uniquely broad portfolio of industry-leading technologies.  Nordson delivers a full range of precision melt stream products — from screws and barrels for extrusion and injection molding — to filtration systems, pumps, and valves — to the extrusion dies and pelletizing systems to meet the constantly evolving needs of the polymer industry.

Nordson Corporation provides customers with local technical sales, service and remanufacturing capabilities through sales organizations and regional manufacturing facilities in over 30 countries.  To learn more visit us at http://www.nordsonpolymerprocessing.com or www.facebook.com/NordsonPPS.


Leave a Reply

Your email address will not be published. Required fields are marked *