Welding stainless steel, titanium, zirconium, niobium and other metals sensitive to atmospheric gases, requires oxygen levels to be as low as 10 ppm and in some cases, knowledge of dew point level in the shielding and purging gas.
Many welds of this nature are still welded with archaic or home-made items to try to shield the weld, but most fail to give satisfactory protection resulting in oxidised joints, which can lead to metallurgical failure at worst and the necessity for additional processes such as mechanical or acid removal of the oxide film.
The extra processes of cleaning/oxidation removal can be so easily negated by using professionally designed and manufactured products and a Weld Purge Monitor®. One such monitor, which measures oxygen level down to 1 ppm is the PurgEye® 300 Plus, now with PurgeNet™!
This lightweight, portable gas analyzer indicates actual oxygen levels down to 1 ppm (accurate to 10 ppm) on a large alpha-numeric OLED display, perfect for achieving oxide-free, zero colour welds time and time again.
“The unique highly advanced communicating system, PurgeNet™ allows connection of accessories such as an automatic welding machine interface, a long distance visual alarm system and a dew point monitor”, said Ron Sewell, Chairman of Huntingdon Fusion Techniques HFT®. “Each of these allows control of a welding system by the weld purge monitor to avoid making faulty welds because of excessive oxygen present.”
The PurgEye® 300 Plus is menu driven by four push buttons on the front and has an internal audible alarm so acceptable and unacceptable oxygen levels can be set. A long-life oxygen sensor, inside the monitor, means there is very little maintenance requirement.
As well as having superb shielding against high frequency electronic disturbances, common with welding power supplies, the PurgEye® 300 Plus is equipped with PurgeLog™ for Quality Control purposes, where data can be stored or printed and transferred to a PC.
No longer do welders have to use Oxygen Monitors that are calibrated to be correct at atmospheric levels for health and safety purposes, as they can used Weld Purge Monitor that is calibrated down to 1 ppm to give welding level requirements and accuracy.
Huntingdon Fusion Techniques HFT® have a worldwide Exclusive Distributor network which can be found at www.huntingdonfusion.com.